Rock Testing Instruments

This is a Dead-Weight type constant pressure system. This system consists of an oil pump, continuously driven by an electric motor to provide the required pressure to the Triaxial Cell chamber. Capacity: 160 bar (160 kg/cm2)

Also Know as Abrasive cut off machine

Heavy duty, pillar type frame with Diesel Engine operated with 5 HP capacity Varying cutting feeds provided with water-fed swivel head to connect to suitable water supply. Provision at base for water.
Note: - Petrol driven engine is also available
Following Core Bits are available as options

• Core Drilling Bit, 21.46 mm dia (EX size)
• Core Drilling Bit, 30.10 mm dia (AX size)
• Core Drilling Bit, 38 mm dia
• Core Drilling Bit, 42.04 mm dia (BX size)
• Core Drilling Bit, 54.74 mm dia (NX size)

These are used to measure the working and ultimate capacities of rock bolt anchors. Further, our products comprises of a central hole jack, hand pump with load gauge, directional control valve and only for central hole jacks above the capacity of 500kN, flexible pipes, truss high tensile test rod with coupling. Moreover, the load cell can be used for the measuring of pull out load and arrangement is provided for fixing dial gauge for estimating deflection against the load. In addition to this, we provide different size of adopters with the high tensile test rod.
Meets:- BS- 11309, ASTM D-4435

Point Load Strength Index of rock cores and irregular lumps, which may be tested without any treatment. The Point Load Test is primarily an Index Test for strength classification of rock materials. This instrument is mainly intended for field measurements on rock specimen, but it can also be used in the laboratory.
Meets: - IS: 8764 -1978

Same as MI.RO-1007 but the it has both Hand operated as well electrical operated