Milestone InstrumentsMilestone Instruments
Milestone Instruments Milestone Instruments Milestone Instruments Milestone Instruments
Milestone InstrumentsMilestone Instruments
Milestone Instruments


Milestone Instruments
Home » Our Products » Thermal Testing Instruments

Thermal Testing Instruments




1 - 2 - 3 - 4 - 5


MI.TH-1054
Micro K.Jeldahl Digestion Unit (Without Glass Part And Clamps)
This is useful for estimation of Nitrogen content in the substance by digestion in micro flasks of capacity 30, 50 & 100 ml. The house is made of M. Steel Stand & pairs of hangers etc. Suitable for 6 test type
request a quote




MI.TH-1055
Soxhlet Extraction Unit (Without Glass Parts And Clamps)
Dry heaters for extractors of soxhlet, suitable for heating of soxhlet flasks-50-500 ml. It consists of M.S. housing two vertical & two horizontal rods with screw to hold flasks.
Test Capacity
a) 3 Test Mantel type with 03 Nos. Electronic regulator
b) 6 Test Mental type with 06 Nos. Electronic regulator.
request a quote




MI.TH-1056
K.Jeldhal Distillation Unit (Without Glass Parts & Clamps)
This is useful for distillation purpose for 300 & 500 ml. flasks, provided with M/Steel tubular stand and brass condenser rack. Works on 220/230 V AC.
Test Capacity
a) 3 Test Mantel Type with 03 Nos. E.R
b) 6 Test Mental type with 06 Nos. E.R
request a quote




MI.TH-1057
K.Jeldhal Digestion Unit (Without Glass Parts & Clamps)
This is useful for estimation of Nitrogen content in the substance by digestion for 300 & 500 ml. flasks, provided with (1) PVC fume duct (2) M. Steel Stand (3) Pairs of Hangers etc.
Test Capacity
a) 3 Test Mantel Type with 03 Nos. E.R
b) 6 Test Mental type with 06 Nos. E.R




MI.TH-1058
Soxhlet Extraction Unit (Water Bath Type) Without Glass Parts And Clamps
Double walled, inside made of heavily tinned brass of stainless steel and outer mild steel sheet. There thermostatically Controlled up to 100ºC having concentric rings (to be used according to the size of the flask) provided with two vertical and two horizontal aluminum rod.
request a quote




MI.TH-1059
Dry Block Heater (Kjeldahl Digestion Unit For 40 Tubes)
This equipment is light portable, compact and efficient with built in control. The unit has 40 digestion tubes of 75 ml volume. The unit is supplied with (1) Digester (made of casted Aluminum having 40 tubes holes for digestion tube) and (2) A1 Detection Tube stand. Temperature is controlled by Energy Regulator up to 400ºC. Complete with two pilot lamp, plug & cord (but without glass tubes). To work on 220/230V AC
Optional Accessories
1. Digital Temperature Indicator Cum Controlled
request a quote




MI.TH-1060
C.O.D. Digestion Appartus
To determine the chemical oxygen demand. It is a solid state heater unit with provision for samples size to heat at temperature of 150ºC +/-1°C controlled by Digital controller cum indicator. It has provision with glass reaction vessels and air condensers. Fitted with the 2 hrs mechanical . timer to work on 220/230V AC, single phase supply.



MI.TH-1061
Slide Warming Table (Biological Table)
It is useful for drying slides with aluminum or S.Steel top stove enameled body, fitted in energy regulator to control temperature upto 70°C to work on 220/230V AC.
  Size (L x B x H)
a) 600 x 150 x 150 mm (24"x6"x6")
b) 300 x 225 x 150 mm (12"x9"x6")
c) 400 x 225 x 150 mm (16"x10"x6")
d) 450 x 300 x 150 mm (18"x12"x6")

request a quote




MI.TH-1062
Heating Mantle
Suitable for laboratories, chemicals, pharmaceuticals, dyes, glass plants etc. Used particularly for heating inflammable liquids. Electric heating net in hand knitted from glass yarn and there is no joint to maintain the strength of the yarm and stands high temperature upto 350ºC. The body of the mantle is spun one piece from mild sheet duty staving painted. All heating mantles are legged with special minerals wools to work on 220/230V AC supply.
Two Tumbler Capacity Rating
50ml & 100 ml 80 watts
250 ml & 500 ml 200 watts
01 Ltr. 300 watts
02 Ltr. 450 watts
03 Ltr. 500 watts
05 Ltr. 600 watts
10 Ltr. 2 x 600 watts
20 Ltr. 3 x 650 watts
50 Ltr. 5 x 650 watts
100 Ltr. 6 x 900 watts
200 Ltr. 9 x 900 watts

request a quote




MI.TH-1064
Heating Tape
Temp range up to 300°C
125 / 135 cm 20 mm. 125 watts
250 / 260 cm. 20 mm 250 watts
500 / 510 cm 20 mm 500 watts
500 / 510 cm 40 mm 1000 watts

request a quote




MI.TH-1065
Laboratory Round Heating Plate
Outer body made of perforated P.C.R.C. sheet and fitted with coil type heating element. Painted attractively with good stove enamel. The cost iron top plate is 20.5 cm dia fitted with an indicating lamp. Used for heating upto 350ºC. To work on 220/230 V AC supply.
Size Energy
20.5 cm 1.5 kw

request a quote




MI.TH-1066
Laboratory Rectangular Heating Plate With Cast Iron Top
This is useful for continuous heating up to 350ºC. The body is made of P.C.R. sheet painted attractively with good stove enamel. Top rectangular cast iron plate has insulated elements. Work on 220/230V AC supply.
Size (L x B x H) Rating
25 x 30 x 15 cm (10"x12"x6") 1.0 kw
25 x 40 x 15 cm (10"x16"x6") 1.5 kw
30 x 45 x 15 cm (12"x18"x6") 2.0 kw
45 x 60 x 15 cm (18"x24"x6") 3.0 kw

request a quote




MI.TH-1067
Jar Testing Or Multiple Spindle Stirrer (Floculator)
This unit is designed for flock information fest in water treatment plants with variable speed from 25 to 150 RPM 1/20 H.P. geared motor whole unit is mounted on mild steel housing with tube lights support by four support or 9½" height. S.Steel stirring peddle 1/3" are attached to rods 10" long ¼" dia motor with lifting knob at the top. Locking collars at stirring rods permits adjustments of paddle height spacing of 6" between rods, permits use of 1000 ml beakers arresting directly on bench. Complete with ON/OFF switch.
Capacity Stirrer
1Ltr. 4
1 Ltr. 6
2 Ltrs. 4
2 Ltrs. 6

request a quote




MI.TH-1068
Autoclave Portable
Single walled complete S.Steel or Aluminum body, seamless. Electricity operated. Complete with M.S. Painted stand, pressure gauge-pressure release valve and safety valve to work on 220/230V AC single phase supply.
Dia x Depth 300 x 300mm
request a quote




MI.TH-1069
Autoclave Verticle
Outer body made of thick mild steel finished oven baked enamel. Inner chamber will be thick stainless steel. The chamber is absolutely leak-proof and it can be operated at any selective point in between 5 to 20 pound/Sq. inch. The instrument is equipped with pressure gauge. Pressure release valve, safety valve, water level indicator and perforated S.S. basket complete with cord and plug. The lid is made of thick mild steel sheet duly lined with stainless steel with pedal lifting arrangements and radial locking devices to work on 220/230V AC single phase supply.
Inner Chamber(Dia x Depth) Load
250 x 450 mm 1.5 kw
300 x 500 mm 2.0 kw
350 x 550 mm 3.0 kw
450 x 600 mm 4.0 kw
550 x 750 mm 5.0 kw

request a quote




MI.TH-1070
Furnace Cruclable
Suitable for Lab-Use Electric heated with Max Tap. 940ºC with working space of 10 depth x 9.50 cm dia. Provided with pyrometer & thermocouple in ceramic sheet in box to work on 220V AC. 10 cm x 9.5 cm
request a quote




MI.TH-1071
Muffle Furnace Rectangular
Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer costing is made of double walled thick P.C.R.C. sheet reattached with thick perforated sheet on the bottom portion, painted with attractive stove enamel. The distinct feature of perforated sheet is to prevent the temperature control unit from very high heat. Heating elements are made of KANTHAL A1 wire of coil form embedded on the muffle with high grade refectory cement and backed by high temperature cer-wool insulation which avoids loss of energy. These arrangements will ensure the most uniform kind of distribution of heat. The weight & size of furnace is of one quarter and 30% respectively as compared to brick furnace. A viewing cap is also provided on the door. Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug to work on 220/230 V. The energy regulator dial is arbitrarily marked 0-100 position. This marking does not indicate temperature. It indicated control level i.e. at position 100 max. electricity is allowed to flow to furnace. Maximum temp.950ºC working temp.900ºC
Muffle Size Rating
100 x 100 x 225 mm (4" x 4" x 9") 1.5 kw
125 x 125 x 250 mm (5" x 5" x 10") 2.0 kw
150 x 150 x 300 mm (6" x 6" x 12") 3.0 kw
200 x 200 x 300 mm (8" x 8" x 12") 5.0 kw
175 x 175 x 475 mm (7" x 7" x 19") 5.0 kw

request a quote


1 - 2 - 3 - 4 - 5